-
The XJ Cherokee hybrid cage kit is available for four-door models only but can be made to fit a two-door with some minor trimming. The exterior part of the cage kit includes the roof hoop and a-pillar/windshield bars. The Interior part of the kit includes the b/c/d pillars and bracing. 16 cage plates are included to sandwich the roof attaching the interior to the exterior cage as well as the interior cage to the sliders and unibody at the rear. Sliders are necessary and an option we provide or you can use any brand as long as there is adequate support for the a-pillar post. Trimming will be required at this location. Main tubes are 1.75 x 0.120 wall DOM Smaller tubing is 1.5 and 1.25 for gusseting. Please download and read the instructions below and contact us with any questions. Useful Links XJ Hybrid Instructions V1 XJ Hybrid Instructions V2 -
"Sure it's safe, I Welderd it myself" FREE Shipping on Swag Items!! -
FREE Shipping on Swag Items!! -
The YJ interior cage kit is finally available! Due to the age in these vehicles (rust) we have added a little extra in our cage kit to ensure your safety. Our kit is complete and includes seat mounting tubes and frame tie-ins. All the floor plates, bushings, and seat tabs are included with pre-bent and notched tubing. All you need to supply is the bolts for the cage plates. All tubing shown in the instructions is included – no extra cost for essential bracing! Our kit was made on a factory YJ with a 1-1/2” body lift and boat sides and used standard Corbeau fixed back seats. If you have a larger body lift – remove it! If you have no-body lift some trimming of the frame mounts may be necessary. If you don’t have boat sides that’s fine it will still fit. If you have different seats we recommend you upgrade to a fixed back seat and utilize the harness bar and seat mounting tubes for optimum safety. Other seats can be made to work but might not work with the X bracing behind the seat. We highly recommend that your seats be mounted to your cage properly and not the factory floor that is likely rusting away or highly modified.FREE SHIPPING IN THE U.S.
Main tubes are 1.75 x 0.120 wall DOM Smaller tubing is 1.5 and 1.25 for gusseting. We have included an enormous amount of photos of our installation to help you with your installation but please read the instructions below and contact us with any questions or concerns. Useful Links Jeep YJ Directions -
The WelderD KRX Elite Cage Kit is now available for one of the most capable sxs on the market! The factory cage, like most other machines, lacks both safety and styling. Our KRX Elite Cage Kit will lower the roofline and produce a safer, better-looking machine. As with all our kits this KRX Elite Cage Kit is made with DOM tubing, bent, notched and ready to install on your machine by a qualified welder/fabricator. Everything necessary to create a strong, safe and good-looking aftermarket cage is provided with the kit – you just supply the welds! The Elite line is available without options. We’ve preselected the options for you to provide the strength and styling our customers expect. All Elite kits are standard with 1.75 x 0.120 wall DOM main tubing. Double B pillar and some bracing can be omitted if desired but will still be included. If our Elite line doesn’t fit your needs please contact us to start the custom design process. Please download/print and review the directions for this kit below PRIOR to placing your order these will NOT be included with your shipment. KRX Elite Cage Kit Directions We provide a roof file below that can be sent directly to your local plasma/laser shop to cut for a perfect fit aluminum roof. KRX Kaos Cage Roof File.dxf -
Fits all 2-seat 2014-current RZR XP 1000 and Turbo models. Does not Fit RZR S or RZR PRO. The WelderD RZR Elite WD Cage Kit is now available! The factory cage, like most other machines, lacks both safety and styling. Our RZR Elite WD Cage Kit will lower the roofline and produce a safer, better-looking machine. As with all our kits this RZR Elite WD Cage Kit is made with DOM tubing, bent, notched and ready to install on your machine by a qualified welder/fabricator. Everything necessary to create a strong, safe and good-looking aftermarket cage is provided with the kit – you just supply the welds! The Elite line is available without options. We’ve preselected the options for you to provide the strength and styling our customers expect. All Elite kits are standard with 1.75 x 0.120 DOM main tubing. Double B pillar and some bracing can be omitted if desired but will still be included. If our Elite line doesn’t fit your needs please contact us to start the custom design process or look at our other options for your RZR. Please download/print and review the directions for this kit below PRIOR to placing your order these will NOT be included with your shipment. RZR Elite WD Cage Kit Directions We provide a roof file below that can be sent directly to your local plasma/laser shop to cut for a perfect-fit aluminum roof. RZR Elite WD Cage Roof File.dxf -
Fits all 2-seat 2014-current RZR XP 1000 and Turbo models. Does not Fit RZR S or RZR PRO. This is our most popular style kit and has a "Flat Roof" styling that is already lower than factory. This kit gives you that ‘chopped’ cage look without modifying the factory cage and provides increased strength over a bolted together thin-walled factory cage. This kit comes with replacement bungs and all the tubes needed for a safe and good-looking cage. The Main tubes are 1.75x.120 wall DOM CNC notched and bent ready for you to assemble on your machine and weld together. Please download/print and review the directions for this kit below PRIOR to placing your order these will NOT be included with your shipment. RZR Race Cage Kit Directions The roof is custom made of .063 5000 Series Marine Grade Aluminum to fit our Race Cage kit. Included are stainless Steel Fasteners qty 12 each: Tab, Bolt, Washer and Speed nut. We also provide a roof file below that can be sent directly to your local plasma/laser shop to cut for a perfect fit aluminum roof. RZR Race Cage Roof File.dxf -
NOTE: Bumper Kits are ONLY sold with Cage Kits. Please contact us for a custom invoice. (636) 271-5696 or travis@welderd.com Fits all 2014-current Polaris RZR XP 1000, XP4 1000 and all RZR TURBO MODELS (does not work with the XP TURBO S) We designed this bumper to be sleek and compact. Main tubing is 1.75” x 0.120” wall DOM. Our kit comes with the tubes and (2) inline tube disconnects to connect directly to the WelderD race cage. Alterations will be necessary if connecting to another aftermarket or factory cage. We highly recommend the WelderD Elite Cage Kit, Tree Kickers, Front Bumper and Rear Bumper as a safe and eye-pleasing package. The 4 seat race cage will be available on the website soon. For now, you can email Travis@WelderD.com to order the 4 seat Elite Cage Kit. Currently, we only offer the front bumper in kit form until we can perfect production and determine shipping options. Our kits are prebent, cnc notched, etched part numbers and slot and tabs for ease of locating parts. All you need to do is follow the instructions and weld them up! Polaris RZR Front Bumper Kit Directions -
NOTE: Bumper Kits are ONLY sold with Cage Kits. Please contact us for a custom invoice. (636) 271-5696 or travis@welderd.com Fits all 2014-current Polaris RZR XP 1000, XP4 1000 and all RZR TURBO MODELS (does not work with the XP TURBO S) This bumper is designed to protect your rear from trees, debris, and other drivers. Main tubing is 1.75” x 0.120” wall DOM. Our kit comes with the tubes and (2) inline tube disconnects to connect directly to the WelderD race cage. Alterations will be necessary if connecting to another aftermarket or factory cage. We highly recommend the WelderD Elite Cage Kit, Tree Kickers, Front Bumper and Rear Bumper as a safe and eye-pleasing package. The 4 seat race cage will be available on the website soon. For now, you can email Travis@WelderD.com to order the 4 seat Elite Cage Kit. Currently, we only offer the rear bumper in kit form until we can perfect production and determine shipping options. Our kits are prebent, cnc notched, etched part numbers and slot and tabs for ease of locating parts. All you need to do is follow the instructions and weld them up! Polaris RZR Rear Bumper Kit Directions -
We now offer tree kicker/rock sliders for your Polaris RZR 2 seaters. Our kickers are made from 1.75” x 0.120” wall DOM and are designed to clear a 35” tire. We offer tree kickers in both kit form ($345) and raw welded ($495). Our kits are prebent, cnc notched with etched part numbers and slot and tabs for ease of locating parts. All you need to do is follow the instructions and weld them up! Welded assemblies are only available raw uncoated. We do this to save costs and prevent shipping damage saving us overhead costs and giving us the ability to pass the savings on to you. Please download/print and review the directions for this kit below PRIOR to placing your order as these will NOT be included with your shipment. Directions: RZR 2-Seat Tree Kicker Directions There are several ways to mount your kickers. We HIGHLY recommend using L bolts and beveled washers to get the best mount. Sliders typically fail due to the way they are mounted not the tubes themselves. Add Hardware-$85 (6) L-bolts and (6) Beveled washers FREE SHIPPING! Kits are premade on our shelves and will ship in 2-3 Business days. Welded assemblies are made to order and will ship in 5-10 business days. When your order has been shipped you will receive an email from FedEx ground with tracking information. -
NOTE: Bumper Kits are ONLY sold with Cage Kits. Please contact us for a custom invoice. (636) 271-5696 or travis@welderd.com We designed this bumper to be sleek, compact and still hold your winch securely. We keep the winch tucked in tight but still easily accessible and have plenty of airflow for the radiator. Main tubing is 1.75” x 0.120” wall DOM. The bumper is tied in with a lower mount as well as 2 upper mounts to ensure a secure pull point. Currently, we only offer the front winch bumper in kit form until we can perfect production and determine shipping options. Our kits are prebent, cnc notched with etched part numbers and slots and tabs for ease of locating parts. All you need to do is follow the instructions and weld them up! Kawasaki KRX Front Bumper Kit Directions -
NOTE: Bumper Kits are ONLY sold with Cage Kits. Please contact us for a custom invoice. (636) 271-5696 or travis@welderd.com Protect your assets with our Rear Bumper Kit. This has a simple and sleek design while keeping functionality and looks in mind. The optional receiver hitch can provide a rear tow location or perform any light-duty towing (Not rated for road use!) Main tubing is 1.75” x 0.120” wall DOM. The bumper is tied in with a lower mount as well as 2 upper mounts to ensure stout protection. Currently, we only offer the rear bumper in kit form until we can perfect production and determine shipping options. Our kits are prebent, cnc notched with etched part numbers and slot and tabs for ease of locating parts. All you need to do is follow the instructions and weld them up! Kawasaki KRX Rear Bumper Kit Directions
