-
The XJ Cherokee hybrid cage kit is available for four-door models only but can be made to fit a two-door with some minor trimming. The exterior part of the cage kit includes the roof hoop and a-pillar/windshield bars. The Interior part of the kit includes the b/c/d pillars and bracing. 16 cage plates are included to sandwich the roof attaching the interior to the exterior cage as well as the interior cage to the sliders and unibody at the rear. Sliders are necessary and an option we provide or you can use any brand as long as there is adequate support for the a-pillar post. Trimming will be required at this location. Main tubes are 1.75 x 0.120 wall DOM Smaller tubing is 1.5 and 1.25 for gusseting. Please download and read the instructions below and contact us with any questions. Useful Links XJ Hybrid Instructions V1 XJ Hybrid Instructions V2 -
The YJ interior cage kit is finally available! Due to the age in these vehicles (rust) we have added a little extra in our cage kit to ensure your safety. Our kit is complete and includes seat mounting tubes and frame tie-ins. All the floor plates, bushings, and seat tabs are included with pre-bent and notched tubing. All you need to supply is the bolts for the cage plates. All tubing shown in the instructions is included – no extra cost for essential bracing! Our kit was made on a factory YJ with a 1-1/2” body lift and boat sides and used standard Corbeau fixed back seats. If you have a larger body lift – remove it! If you have no-body lift some trimming of the frame mounts may be necessary. If you don’t have boat sides that’s fine it will still fit. If you have different seats we recommend you upgrade to a fixed back seat and utilize the harness bar and seat mounting tubes for optimum safety. Other seats can be made to work but might not work with the X bracing behind the seat. We highly recommend that your seats be mounted to your cage properly and not the factory floor that is likely rusting away or highly modified.FREE SHIPPING IN THE U.S.
Main tubes are 1.75 x 0.120 wall DOM Smaller tubing is 1.5 and 1.25 for gusseting. We have included an enormous amount of photos of our installation to help you with your installation but please read the instructions below and contact us with any questions or concerns. Useful Links Jeep YJ Directions -
The WelderD KRX Elite Cage Kit is now available for one of the most capable sxs on the market! The factory cage, like most other machines, lacks both safety and styling. Our KRX Elite Cage Kit will lower the roofline and produce a safer, better-looking machine. As with all our kits this KRX Elite Cage Kit is made with DOM tubing, bent, notched and ready to install on your machine by a qualified welder/fabricator. Everything necessary to create a strong, safe and good-looking aftermarket cage is provided with the kit – you just supply the welds! The Elite line is available without options. We’ve preselected the options for you to provide the strength and styling our customers expect. All Elite kits are standard with 1.75 x 0.120 wall DOM main tubing. Double B pillar and some bracing can be omitted if desired but will still be included. If our Elite line doesn’t fit your needs please contact us to start the custom design process. Please download/print and review the directions for this kit below PRIOR to placing your order these will NOT be included with your shipment. KRX Elite Cage Kit Directions We provide a roof file below that can be sent directly to your local plasma/laser shop to cut for a perfect fit aluminum roof. KRX Kaos Cage Roof File.dxf -
We now offer two versions of tree kicker/rock sliders for your Kawasaki Teryx KRX 1000. Both versions are made from 1.75” x 0.120” wall DOM and are designed to clear a 35” tire. We use formed tabs and bolts which offer superior strength over other manufacturers' flat tabs which tend to bend no matter the thickness. Version 2 This version has more tubing/bracing than our lighter-weight version to provide additional protection and be a functional step. We offer the tree kickers in both kit form ($415) and raw welded ($595). Our kits are prebent, cnc notched with etched part numbers and slot and tabs for ease of locating parts. All you need to do is follow the instructions and weld them up! Welded assemblies are only available raw uncoated. We do this to save costs and prevent shipping damage saving us overhead cost and giving us the ability to pass the savings on to you. Please download/print and review the directions for this kit below PRIOR to placing your order as these will NOT be included with your shipment. Directions: Kawasaki KRX Tree Kicker Directions Add Hardware $15 (8-M10x1.25x40 bolts and washers) FREE SHIPPING! -
The WelderD KRX Kaos Cage Kit is now available for one of the most capable sxs on the market! The factory cage, like most other machines, lacks both safety and styling. Our KRX Kaos Cage Kit will lower the roof line and produce a safer, better looking machine. As with all our kits, this KRX Kaos Cage Kit is made with .120 DOM tubing, bent, notched and ready to install on your machine by a qualified welder/fabricator. Everything necessary to create a strong, safe and good looking aftermarket cage is provided with the kit – you just supply the welds! The Kaos is available in 2 options. We have a 6.5” drop which gives a low streamline look but is too low for some riders so please check measurements before ordering. Our 4.5” drop is for taller riders and those that want a better windshield fitment. All WelderD kits are standard with 1.75 x 0.120 wall DOM main tubing. Please download/print and review the directions for this kit below PRIOR to placing your order these will NOT be included with your shipment. *Pictures are of the 6.5” Drop Cage. You can see the specific windshield photos in the Directions provided at the bottom of this page. Both versions will accommodate a windshield but the lower version may need some trimming for a more desirable look. Pictures show a Factory Kawasaki glass Windshield. Please download/print and review the directions for this kit below PRIOR to placing your order as these will NOT be included with your shipment. Directions: KRX Kaos Cage Kit Directions We also provide a roof file below that can be sent directly to your local plasma/laser shop to cut for a perfect fit aluminum roof. KRX Kaos Cage Roof File.dxf FREE SHIPPING! -
Fits all 2-seat 2014-current RZR XP 1000 and Turbo models. Does not Fit RZR S or RZR PRO. The WelderD RZR Elite WD Cage Kit is now available! The factory cage, like most other machines, lacks both safety and styling. Our RZR Elite WD Cage Kit will lower the roofline and produce a safer, better-looking machine. As with all our kits this RZR Elite WD Cage Kit is made with DOM tubing, bent, notched and ready to install on your machine by a qualified welder/fabricator. Everything necessary to create a strong, safe and good-looking aftermarket cage is provided with the kit – you just supply the welds! The Elite line is available without options. We’ve preselected the options for you to provide the strength and styling our customers expect. All Elite kits are standard with 1.75 x 0.120 DOM main tubing. Double B pillar and some bracing can be omitted if desired but will still be included. If our Elite line doesn’t fit your needs please contact us to start the custom design process or look at our other options for your RZR. Please download/print and review the directions for this kit below PRIOR to placing your order these will NOT be included with your shipment. RZR Elite WD Cage Kit Directions We provide a roof file below that can be sent directly to your local plasma/laser shop to cut for a perfect-fit aluminum roof. RZR Elite WD Cage Roof File.dxf -
We now offer two versions of tree kicker/rock sliders for your Kawasaki Teryx KRX 1000. Both versions are made from 1.75” x 0.120” wall DOM and are designed to clear a 35” tire. We use formed tabs and bolts which offer superior strength over other manufacturers' flat tabs which tend to bend no matter the thickness. Version 1 This is a simple lightweight version to protect from rocks, stumps and trees without added weight. We offer the tree kickers in both kit form ($345) and raw welded ($495). Our kits are prebent, cnc notched with etched part numbers and slot and tabs for ease of locating parts. All you need to do is follow the instructions and weld them up! Welded assemblies are only available raw uncoated. We do this to save costs and prevent shipping damage saving us overhead cost and giving us the ability to pass the savings on to you. Please download/print and review the directions for this kit below PRIOR to placing your order as these will NOT be included with your shipment. Directions: Kawasaki KRX Tree Kicker Directions Add Hardware $15 (8-M10x1.25x40 bolts and washers) FREE SHIPPING! -
"Sure it's safe, I Welderd it myself" FREE Shipping on Swag Items!! -
The WelderD KRX4 Cage Kit is now available for one of the most capable sxs on the market! The factory cage, like most other machines, lacks both safety and styling. Our KRX4 Cage Kit will lower the roof line and produce a safer, better looking machine. As with all our kits this KRX4 Cage Kit is made with .120 DOM tubing, bent, notched and ready to install on your machine by a qualified welder/fabricator. Everything necessary to create a strong, safe and good looking aftermarket cage is provided with the kit – you just supply the welds! The KRX4 kit is available without options. We’ve preselected the options for you to provide the strength and styling our customers expect. All KRX kits are standard with 1.75 x 0.120 wall DOM main tubing. Double B pillar and some bracing can be omitted if desired but will still be included. If this kit doesn’t fit your needs please contact us to start the custom design process. Please download/print and review the directions for this kit below PRIOR to placing your order these will NOT be included with your shipment. Kawasaki KRX4 Cage Kit Directions FREE SHIPPING! -
Test fake product. -
The WelderD Honda Talon 2-seat Cage Kit is now available! The factory cage, like most other machines, lacks both safety and styling. Our Honda Talon Cage Kit will lower the roofline and produce a safer, better-looking machine. As with all our kits, this Honda Talon Cage Kit is made with DOM tubing, bent notched and ready to install on your machine by a qualified welder/fabricator. Everything necessary to create a strong, safe and good-looking aftermarket cage is provided with the kit – you just supply the welds! We’ve preselected the options for you to provide the strength and styling our customers expect. All kits are standard with 1.75 x 0.120 wall DOM main tubing. If this cage kit doesn’t fit your needs please contact us to start the custom design process. Please download/print and review the directions for this kit below PRIOR to placing your order these will NOT be included with your shipment. Honda Talon Cage Kit Directions We also provide a roof file below that can be sent directly to your local plasma/laser shop to cut for a perfect fit aluminum roof. Honda Talon Cage Roof File.dxf -
FREE Shipping on Swag Items!!
